- Price
- 948.0911999999998 USD
- Rating
- ★ 5.00
- Model
- 4000262246373
This review is for the European Classical Lightweight Luxury Studio Resin Table Lamp Retro Living Room Bedside American Table Lamp, a green resin and textile lamp listed in Lights & Lighting. If you are setting one up, troubleshooting a lamp that is not working, or asking whether it is worth it at the listed price, the practical details below focus on what the listing actually states. The lamp has a 5.00 rating, uses an E27 base, and is dimmable with a touch on/off switch, but it does not include bulbs and it is listed with an EU plug and 220V voltage. Those details shape the setup and the common problems to check.
Unboxing and first setup
Start by inspecting the lamp before you connect it. The listing describes a resin lamp with a textile body, a fabric shade, green body and frame color, and engraved technics. Check that the shade, frame, and body arrive without visible damage. The listing does not provide a step-by-step assembly sequence, so use any included instructions and avoid forcing parts into place. If something looks misaligned or damaged, stop and contact support rather than continuing with setup.
The most important first check is the bulb. The listing says bulbs are not included, so a lamp that appears dead out of the box may simply have no bulb installed. The base type is E27, the light source is listed as LED bulbs, and the wattage is listed as 41-50W. The listing does not state a specific bulb shape, color temperature, or dimmer compatibility list, so those details should be confirmed with support if they matter to your setup.
Before plugging in, check the power details. The listing states an EU plug, 220V voltage, and AC power source. For US buyers, this is the key compatibility point: do not force the EU plug into an outlet that does not match, and do not assume the lamp will work with a different voltage setup without qualified advice. If your outlet or voltage does not match the listing, resolve that question before use.

Configuration tips
The lamp is listed in sizes M and L, so confirm which size you ordered before placing it. Its application is listed as Bed Room, and the shade direction is down, which suits bedside or living-room placement where downward light is wanted. The touch on/off switch and dimmable function are the main controls; the listing does not state a remote, app control, or additional switch type.
For daily use, install an E27 LED bulb that fits the stated 41-50W rating. Because bulbs are not included, keep a compatible bulb on hand before setup. The listing does not state whether the dimming function requires a particular LED bulb specification, so if dimming behavior is inconsistent, treat bulb compatibility as an open question rather than a confirmed fault.
The green resin and textile finish is part of the European classical look, and the listing states finish as none. Keep the lamp on a stable surface and follow any care instructions included with the product. The listing does not state cleaning methods, so avoid harsh treatments unless support confirms them.

Common problems
A common setup problem is no light at all. Check the obvious causes first: no bulb is included, the bulb must be E27 and LED, and the lamp needs AC power through the stated EU plug and 220V voltage. If the bulb is missing or not seated, the touch switch will not produce light. If the plug or voltage does not match your outlet, stop and seek qualified advice.
Another problem is the touch switch not responding. Confirm that the lamp is connected to a compatible power source and that the bulb is installed. The listing states a touch on/off switch, but it does not describe a reset procedure or a secondary switch. If the lamp has power and a compatible bulb but the touch control still does not respond, contact support.
Dimming issues are also worth separating from total failure. The listing says the lamp is dimmable, but it does not state a required dimmer-compatible bulb specification. If the lamp lights but dimming is uneven, check that the E27 LED bulb is seated correctly and confirm bulb compatibility with support. Do not assume the lamp is faulty until the bulb and power setup have been checked.
Flicker or intermittent light should be handled the same way: confirm the bulb is E27 LED, seated, and within the listed 41-50W rating, then confirm the power connection. The listing does not state a troubleshooting sequence for flicker, so if the issue continues after basic checks, support is the correct next step.
Size or appearance concerns are less about function but still common. The listing offers M and L, and the body and frame color are green with a fabric shade and resin and textile materials. If the delivered size, color, or finish does not match the listing, contact support before using the lamp further.

Fixes
Work through fixes in a simple order. First, confirm that a compatible E27 LED bulb is installed, because bulbs are not included. Second, confirm that the bulb is within the listed 41-50W rating and is seated correctly. Third, confirm that the lamp is connected to AC power through the stated EU plug and 220V voltage. Fourth, use the touch on/off switch and test the dimmable function. If the lamp still does not work, stop repeating the same steps and contact support.
If the lamp arrives damaged, do not continue setup. If the plug or voltage is incompatible with your US outlet, do not force it or improvise a permanent connection; ask support or a qualified electrician about the correct path. If the touch switch fails after the bulb and power checks, or if dimming remains inconsistent with a compatible bulb, support should assess the issue under the stated 1 year warranty.

When to contact support
Contact support if the lamp arrives damaged, if the touch switch does not respond after bulb and power checks, if dimming remains inconsistent, if the delivered size or green finish does not match the listing, or if the EU plug and 220V rating do not match your setup. The listing gives SKU 4000262246373 and model number WS36, which can help identify the product. The warranty is listed as 1 year, so keep your order details and report problems promptly.
Final verdict
At the listed price, this lamp is worth it for buyers who want a green resin and textile European classical look with an engraved finish, a fabric shade, a touch on/off switch, and dimmable bedside lighting. The 5.00 rating and 1 year warranty support the value case, but the listing does not include bulbs and does not state detailed bulb or dimmer compatibility. US buyers should treat the EU plug and 220V voltage as the main pre-purchase check. If those details fit your setup and you budget for an E27 LED bulb, the lamp is a reasonable choice; if not, resolve compatibility before buying.
